ACOM 1010 | HF Linear Amplifier

Bel voor levertijd

Frequency Coverage

• All amateur bands in the 1.8-29.7 MHz frequency range;
• Extensions and/or changes on request;

Power Output

• 700 W PEP or 500 W continuous carrier;

Intermodulation Distortion

• Better than 35 dB below rated output;

Hum and Noise

• Better than 40 dB below rated output;

Harmonic Output Suppression

• Better than 50 dB below rated output;

Input and Output Impedances

• Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
• Input circuit: broadband, SWR less than 1.3, 1.8-30 MHz continuously (no tuning, no switching);
• Bypass path: SWR less than 1.1, 1.8-30 MHz continuously, 200 W maximum;
• Output (antenna) impedance matching capability: SWR up to 3 or higher;

RF Gain

• 11 dB typically, frequency response less than 1 dB (50-70 W drive power for rated output);

Mains Power Supply Voltage

• 85-132 VAC / 170-264 VAC (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, +10% -15% tolerance), 50-60 Hz, Single phase;

Mains Power Consumption

• 1200 VA at rated output;

Safety and Electromagnetic Compatibility

• Complies with CE safety and electromagnetic compatibility requirements, as well  as with the US Federal Communications Commission (FCC) regulations;

Size & Weight (operating, excluding connected cables)

• WxDxH: 402x315x166 mm, 17 kg (15.9x12.4x6.6 inches, 37.5 lbs.);

Shipping Size & Weight

• WxDxH: Approx. 580x460x340 mm, 20.0 kg (22.9x18.2x13.4 inches, 44.1 lbs.);
• Please, contact us for shipment details;

Operating environments

• Temperature range: 0 to +50 degrees Celsius (32 degrees F to 122 degrees F);
• Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
• Height above sea level: up to 3050 m (10000 ft) without output deterioration.